Do you know what junkyard tools are? Of course, no, that’s why you’re here.

But there’s good news for you. This article aims at describing scrap yard equipment and tools. If you plan to open a dump, you will know exactly what tools to get.

Let’s keep this discussion going.

Scrapyard Tools and Equipment

As a business or household owner handling waste, you must have the necessary equipment and tools.

They are the first friends who will simplify your job, save time, and dramatically improve your profit margin. Most importantly, they will ensure your safety in the workplace.

What Equipment And Tools Are Available In A Scrap Yard?

There’re several of them.

To work effectively in a junkyard, you’ll need some tools at every step. You’ll need safety equipment and tools for inspection/sorting, dismantling, collecting, and cleaning scraps.

Let’s not leave you in the dark. We’ll hold a whole discussion on each of these classes of equipment. Enjoy your ride.

Safety Kits

These are the first equipment and tools you’ll need at a scrap yard. Before commencing work, wearing all personal protective equipment (PPE) and adhering to safety guides is essential.

They can keep you from getting hurt. Some safety kits you’ll need include goggles, work gloves, trousers, long sleeves, steel-toed footwear, and metatarsal protection.

Common Scrapyard Equipment

Right below are some standard scrap yard equipment and tools you’ll need.

  • Balers

This kind of equipment is often found in larger scrap yards. This handy machine is used for loading and packaging waste for shipment to recycling centers.

Balers are of different classes. There are front-loading balers, automatic balers, and standing balers.

  • Roll Off Trucks and Trailers

Both small and big scrap yards use roll-off trucks and trailers. They use these vehicles to move materials with their mobile containers or trailers filled with garbage.

Tools for Scrap Inspection/Sorting

Inspection is an essential part of a junkyard.

Before you start working on scrap, knowing which material you are dealing with is essential. This will help you determine what tools you will need for your operation.

For this, you will need a magnet and a metal file.

  • Magnet

Using a magnet is one of the most straightforward and rapid ways to identify ferrous metals from non-ferrous metals. There are three types of attractions that you may use to perform this inspection.

This includes electromagnets and temporary and permanent magnets.

  • Metal File

If you want to check for plating over metals, a metal file is the best equipment.

It is understood that most present-day metals have a different coating on the outside. This protects them from shocking or electrocuting anyone too close when the power is on.

Also, manufacturing industries use non-ferrous metals (copper), plastics, or chromium to protect the metal from the inside.

Hence, if you want access to the correct metal, you’ll need a metal file and scratch through the surface.

Scrap Dismantling Tools

Scrap yards may not operate well without disassembly tools.

Most of the articles brought into their facilities need to be dismantled. They have tools such as a cordless driller and impact wrench.

Now, let’s look at these two disassembly tools.

  • Cordless Drill

This is one of the disassembly tools that can be used in various ways. First off, scrap yards use it to drive out screws. Second, it can drill holes into ancient or rusty materials.

  • Impact Wrench

An impact wrench also does the same task as a cordless drill. Most scrap yards use it to lose and tighten lug nuts and rusted fasteners.

The impact wrench provides a very rational torque that regular drills can’t do. One of the best impact wrenches you can use to scratch is WD-40.

Tools for Collecting Scraps

Some collection tools you can use at scrap yards include a scrap hopper, a pallet balance jack, and a pallet with balance on the ground.

  • Scrap Metal Hopper

Do you know what a scrap metal hopper is? It is a tool to collect and transport large steel plates with a forklift. A flatbed dumping hopper is the best for such an operation.

  • Pallet Jack Scale

This is an industry tool used to lift and move a heavy load on a pallet.

Scrap yards use it to weigh heavy metal objects on the fling. With this tool, you don’t need a separate platform to access the weight of the junk.

  • Pallet Floor Scale

Scrap yards use the pallet with a floor scale to weigh all collected scrap metal. They put the loaded pallet on balance and then read the weight of the matter.

Scrap Cleaning Tools

 

  • Sawzall

It’s one of the most precious tools for junkyards. Do you have any idea why? Most of these facilities desire clean aluminum and copper.

As such, they use Sawzall to clean dirty rads along with radiators. The tool is high-speed and efficient. This makes it possible to clean the articles in bulk.

  • Wire Stripper

This cleaning tool can be spotted in different forms and sizes in scrap yards. There’s the machine and the cutter. Both are used to remove plastic and rubber from copper leads and wires.

Household Tools

We added this category of equipment and tools because they play a significant role in scrap yards and recycling centers. Among these essential tools are a screwdriver, hammer, crowbar, and more.

Let us briefly examine their uses.

A screwdriver is used for disassembling metal objects using screws. Hammer, as you know, is the best course of action. It may be used to break down materials into smaller and more manageable parts.

As for the crowbar, it can be used to open and break down materials into little pieces.

There are many more scrap equipment and tools than those we have just mentioned. These above are among the most important and commonly used tools in junkyards.

While some tools are only found in large scrap yards, there’re also some tools you can find in smaller yards.

To have remained until now, we believe you’re better informed about the scrap yard equipment and tools. Whether high or low-valued scraps, you know the right equipment and tools.